OBD Dash Cam Power Cable USB C,Parking Mode Kit with Low Voltage Protection | Plug and Play OBD2 Hardwire Kit with LED Display & 4-Level Adjustable Cutoff, ACC Detection 5V/3A Output for Dash Camera

Key features

• 【Smart ACC Detection — Auto-Switches Driving & Parking Mode】 Precision ACC detection automatically identifies vehicle ignition status and switches between parking surveillance and auto power-off as needed. Smart power management for driving, temporary stops, and long-term parking — no manual operation, no missed recordings.
• 【4-Level Low Voltage Protection — Prevents Battery Drain】 Supports 4 adjustable voltage cutoffs (11.6V/11.9V/12.5V/20min Timer). Built-in LED voltmeter monitors battery voltage in real time. Automatically cuts power when voltage drops too low — preventing over-discharge, extending battery life, and guaranteeing your vehicle starts every time
• 【True 24/7 Parking Surveillance — Timelapse + Shock Wake-Up】 Activates low-power timelapse recording while parked and instantly switches to full HD recording when vibration is detected. Unlike cheap cables that drain your battery with constant full-power recording, our Type-C OBD charger cable enables smart energy-efficient surveillance — full protection, zero battery anxiety
• 【Plug and Play — No Fuse Box, No ACC Wire Hunting】 Install in under 3 minutes. Simply plug OBD2 to USB-C power cable into OBD-II port — no fuse tapping, no wire splicing, no ACC wire hunting, no warranty voiding. Hidden wiring keeps cabin clean. Frees up cigarette lighter port
• 【Upgraded Chipset + A8-B8 Adapter — Broad Vehicle Compatibility】 Built-in gyroscope chip with A5-B5 signal pin support plus free A8-B8 signal adapter for special models. Optimizes OBD power compatibility across most standard OBD2 vehicles (12V-24V). Works with dash cams, GPS, and radar detectors. One kit, universal fit
• 【20-Minute Delay-Off — Never Miss Critical Short-Stop Moments】 Designed for traffic jams, drive-thru, and temporary stops — prevents dash cam power cycling during brief engine shutoffs. Smart timer ensures continuous recording through short stops, capturing every critical moment without interruption.
• 【Complete Kit — Everything You Need】 What's in the Box: OBD2 Hardwire Kit (with LED Display), USB-C Cable (13.35ft), Ferrite Core, A8-B8 Adapter, Pry Tool, 3 Zip Ties,Manual. Built-in: Over-Current, Short-Circuit, Over-Heat, Reverse Polarity, Low-Voltage Protection & Built-in Fuse.