OBD 2 Dash Cam Hardwire Kit USB C, Plug and Play Adapter with LED Display, 4-Level Adjustable Low Volt Protection, Acc Driver Detection Cable for Parking Mode & Continuous Recording,11.5ft

Key features

• Plug and play — no fuse tapping, no ACC wire hunting, no electrical knowledge required. Simply locate your OBD port, plug in, and you‘re done in under 60 seconds. Zero damage to factory wiring.
• Built-in ACC smart chip switches to continuous recording while driving and automatically enters parking surveillance mode when engine is off. 24/7 protection against hit-and-runs and parking lot dings — critical footage always saved.
• Offers 4 adjustable cutoff levels (11.6V / 11.9V / 12.5V / 20-Min Timer) for different battery conditions and usage scenarios. First-time users should start with 12.5V to ensure reliable startup even with older batteries or in cold weather.
• Built-in LED voltmeter display shows real-time battery voltage at a glance. Automatically cuts power when voltage drops below your preset level, ensuring enough reserve power for a smooth start every time — no more dead battery anxiety.
• Powers directly from OBD port — completely frees up your cigarette lighter. Charge your phone, run your inflator, or use your car vacuum simultaneously — no more fighting over the only 12V socket.
• Compatible with 12V-24V vehicles (sedans/SUVs/trucks) and works with VIOFO, 70mai, Wolfbox, Rove, RedTiger, and most major USB-C dash cam brands. Please confirm before purchase: your OBD port provides continuous power with engine off (check manual or use multimeter), and your dash cam supports parking recording.
• Friendly Reminder: On some vehicles (especially European brands like Mercedes-Benz, BMW, Volkswagen), the OBD port may continue to output ACC signals even with the engine off, which may prevent the 20-min timer from activating. Before using this feature, please verify that your OBD port is fully powered off after shutdown. Contact our support team for assistance if needed.