OBD2 Dash Cam Hardwire Kit, OBD2 Power Charging Cable USB Type C

Key features

• Gyroscope Vibration Detection: This new OBD dash camera hardwire power charging kit adds a vibration detection function, any vibration will trigger and active the kit to start the power supply
• 24h Parking Mode / ACC Mode: MODE - will active your dashcam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; MODE O will active ACC mode which only supplier power when engine is on
• Dash Cam OBD Hardwire Kit: This OBD II dash cam hard wire power charging cable kit is a model for most car dash cameras, GPS, radar, and dash cams on the market (Please note that this unit compatible with EV Car/Electric Vehicle)
• Simple Plug-in Installation: The OBD dash cam hardwire cable is easy to install by plugging it into your car's OBD connector and making sure it can power on your dashcam, then hide the extra wire; unlike other complex hardwire kits, you need to deal with fusebox and battery electricity
• Low Voltage Protection: It has a smart low voltage protection system that will automatically shut off the power to your dash cam when the battery voltage drops to 11.6V or 23.2V, thus preventing it from draining the battery
• Clean and Space Saving: By using this dash cam OBD hardwire kit you can easily hide the wire and cable to make your carpet looks cableless and clean; also this dash cam charger doesn't occupy your car's cigarette lighter port and allow you can use the port to charge other devices in your car
• ACC Mode Power Off Delay: The ACC Mode O, the OBD hardwire kit will power off in 20 minutes after the car engine is off (Time delay setup to provide power for car start/stop function)
• USB Type-C Connector Compatibility: The USB Type-C connector uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins