Mount-It! Dual Monitor Arm Desk Mount, Gas Spring, Screens to 32 in, Black | Fits 2 screens 13-32 in, 2.2-19.8 lb per arm, VESA 75x75 and 100x100, 13 in gas spring lift, clamp or grommet base

Key features

• Built for dual monitor desk setups: Designed for two monitors up to 32 inches each and up to 19.8 lbs per arm, using standard VESA 75x75mm or 100x100mm patterns, with gas spring arms and an adjustable counterbalance.
• Covered for as long as you own it: A lifetime manufacturer warranty and US-based product support come standard with this mount. Product-specific, step-by-step instructions are included in the box, with clear illustrations for both the clamp and grommet installation options.
• Check your fit before you order: Holds two flat or curved monitors from 13 to 32 inches, each 2.2 to 19.8 lbs, with VESA 75x75 or 100x100 mm holes. Measure center to center between the four holes on the back, across then down. Not for screens over 32 inches.
• Position each screen independently: Up to 13 inches of height travel, 90 degrees of tilt up or down, 180 degrees of swivel each way, and 360 degrees of rotation. Line both monitors up at one eye level, or turn either to portrait when the task changes.
• Installs on any desk except glass: Clamp to an edge 0.4 to 3.35 inches thick, or use the grommet base through a desktop up to 3.15 inches thick. The hole need only fit the bolt; drill one if needed. All hardware and hex wrenches included; you provide the Phillips screwdriver.
• Clear the desk and hide the cables: Lifting both monitors off the desktop frees the space two separate stands would take. Cables run under removable covers along each arm. Every three months, check that the clamp and joints are still snug.
• For home offices, classrooms, and shared desks: Built for remote workers, students, gamers, and IT teams setting up two-screen workstations. Quick-release VESA plates slide into each arm, so a monitor can be swapped or removed later without taking the arm apart.